Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 64 items
This is an adapter that can be mounted on panels or walls to relay video and audio signals. It is a product where the mounting nut and relay connector are integrally molded.
This is a relay connector with an integrated panel mount section that can be attached using M3 screws and is designed for use with standard cables. For more details, please refer to the related links.
This is a dustproof and waterproof relay adapter compatible with IP66 and IP67.
This is a panel mount type dustproof and waterproof relay adapter that complies with IP66 and IP67 standards. IP66: Completely dust-tight structure (a structure that completely protects against the ingress of dust), and is not adversely affected by direct water jets from any direction (12.5 liters per minute at a distance of 3 meters and 30 kPa for 3 minutes). IP67: Completely dust-tight structure (a structure that completely protects against the ingress of dust), and does not allow water ingress even when submerged in water at a specified pressure and time (15 cm to 1 m underwater for 30 minutes). For more details, please refer to the related links.
This is a set product that allows the connection chip to be mounted on the panel.
This is a set product that enables the panel mounting of video and communication outlet chips using Panasonic-made device embedded plates and small mounting frames (M3 tapped type). For more details, please see the related link.
Snap-in connectors, sets that combine cables with DLX-type adapters to form Neutrik-type shapes, and connectors from Neutrik.
It is a panel mount type that fits the Neutrik DLX series with a DLX type adapter installed, as well as a panel mount made by Neutrik. For more details, please see the related links.
Compatible with commercially available outlet plates from Panasonic, Toshiba Lightec, and Jinbo Electric. Also compatible with Panasonic's Advance and SO-STYLE.
●This product is a set that incorporates the snap-in relay connector 【3013AJSLQF6WH】 into the guide chip 【SY-NWT-KH-WH】. ●It is a snap-in mounted metal shield type relay adapter for extending LAN cables up to category 6. For more details, please visit our product page linked.
Compatible with commercially available outlet plates from Panasonic, Toshiba Lightec, and Jinbo Electric. Also compatible with Panasonic's Advance and SO-STYLE.
●This product is a set that incorporates the snap-in relay connector 【3013AJSLQF6WH】 into the guide chip 【SY-NWT-KH-WH】. ●It is a snap-in mounted metal shield type relay adapter for extending LAN cables up to category 6. For more details, please visit our product page linked.
Compatible with commercially available outlet plates from Panasonic, Toshiba Lightec, and Jinbo Electric. Also compatible with Panasonic's Advance and SO-STYLE.
●This product is a set that incorporates the snap-in relay connector 【3013AJIC6WH】 into the guide chip 【SY-NWT-KH-WH】. ●It is a relay adapter for extending LAN cables up to category 6. ●Since it is an adapter with RJ-45 female connectors on both sides, a LAN cable with an RJ-45 connector can be directly connected to the back side as well. For more details, please visit our product page linked here.
Panel mount relay adapter with dual RJ-45 female connectors, compatible with CAT6 standards.
● This is an adapter that connects LAN cables by being mounted on panels or walls, featuring RJ-45 female connectors on both sides. ● It complies with the CAT6 standard and supports 1000BASE-T communication. ● It is very convenient for extending connections between devices and equipment using CAT6 compatible LAN cables.
Panel mount relay adapter, USB 3.0 compatible, cross-wired type, both sides USB 3.0-A female.
● This is an adapter that connects USB cables by being mounted on panels or walls, featuring USB 3.0 Type A female connectors on both sides. ● It is very convenient for connecting devices and equipment internally and externally using USB cables. ● The internal wiring of this product is cross-wired (pins 5 and 8, as well as pins 6 and 9 are crossed). Depending on the cable connected to this product, communication may not be possible under the USB 3.0 standard. For more details, please refer to the related links.
Compatible with commercially available outlet plates from Panasonic, Toshiba Lightec, and Jinbo Electric. Also compatible with Panasonic's Advance and SO-STYLE.
●This product is a set that incorporates the snap-in relay connector 【FAU3-AFAF180-WH-ABS】 into the guide chip 【SY-NWT-KV-WH】. ●The internal wiring of this product is a straight connection for all pins of the same type. Depending on the cable connected to this product, communication may not be possible under the USB3.0 standard. For details on the possibility of USB3.0 communication depending on the type of cable connected, please refer to our product page linked in the related links. For more details, please see the related links.
![HDMI Extension Adapter A Male - A Female [HDMI 2.0 Compatible]](https://image.mono.ipros.com/public/product/image/8bb/2001486890/IPROS16787757896219255108.jpg?w=280&h=280)
HDMI extension adapter Type A male - Type A female [HDMI 2.0 compatible]
● This is an HDMI extension adapter with one side featuring a male HDMI-A connector and the other side featuring a female HDMI-A connector. ● For example, in locations where HDMI cables are frequently plugged and unplugged, connecting devices and cables through this adapter can help reduce the wear and tear on the HDMI connectors on either the device side or the cable side. For more details, please refer to the related links.
HDMI Extension Adapter Type A Male - Type A Female Vertical L-Shaped (Upward) [HDMI 2.0 Compatible]
● This is an HDMI extension adapter with one side featuring a male HDMI-A connector and the other side featuring a female HDMI-A connector. ● It has a shape that bends 90 degrees upward in the vertical direction (when viewed from the male connector side, the shape bends upward with pin 1 on the left side). ● It is convenient for wiring HDMI cables in tight spaces. For more details, please see the related links.
HDMI extension adapter Type A male - Type A female horizontal L-shaped (left-facing) [HDMI 2.0 compatible]
● This is an HDMI extension adapter with one side featuring a male HDMI-A connector and the other side featuring a female HDMI-A connector. ● It has a shape that bends 90 degrees to the left in the horizontal direction (when viewed from the male A connector side, the shape bends to the left with pin 1 on the left side). ● It is convenient for wiring HDMI cables in tight spaces. For more details, please see the related link.
HDMI extension adapter Type A male - Type A female horizontal L-shaped (right-facing) [HDMI 2.0 compatible]
● This is an HDMI extension adapter with one side being a male HDMI-A connector and the other side being a female HDMI-A connector. ● It has a shape that bends 90 degrees to the right in the horizontal direction (when viewed from the male A connector side, the shape bends to the right with pin 1 on the left side). ● It is convenient for wiring HDMI cables in narrow spaces. For more details, please see the related link.
USB extension adapter USB 3.0 compatible cross-wired type Type A female - Type A female
● This is a USB extension adapter with Type-A female connectors on both sides. ● It complies with the USB 3.0 standard (can also be used for extending USB 2.0 Type-A connectors, but communication will be at USB 2.0 standard). ● It is used for extending connections with USB cables that have USB Type-A male connectors. ● The internal wiring of this product is cross-wired (pins 5 and 8, as well as pins 6 and 9 are crossed). Depending on the cable connected to this product, communication at USB 3.0 standard may not be possible. For details on the compatibility of USB 3.0 communication based on the type of cable connected, please refer to our product page linked in the related links. For more details, please see the related links.
Coaxial connector relay adapter BNC male - BNC female (L-angle type, impedance 50Ω)
●This is a BNC male to BNC female L-angle shaped coupling adapter. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector relay adapter BNC male - BNC female x 2 Y-type splitter (impedance 50Ω)
●This is a Y-shaped branching relay adapter with BNC male and two BNC female connectors. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector relay adapter BNC male - BNC female x 2 T-type splitter (impedance 50Ω)
●This is a T-shaped branching relay adapter with BNC male and two BNC female connectors. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector relay adapter BNC female - BNC female (impedance 50Ω)
● It is a BNC female coupling adapter on both sides. ● This product is adjusted to an impedance of 50Ω. For more details, please refer to the related link.
Coaxial connector relay adapter, both sides BNC female, insulated panel mount type (impedance 75Ω)
● This is a relay adapter with BNCA female connectors on both sides. ● It is a panel mount type that can be attached to a panel. ● The insulating resin on the outer circumference of the adapter ensures insulation between the mounted panel and the adapter. ● This product is adjusted to an impedance of 75Ω.
Coaxial connector relay adapter, T-type splitter SMA male - SMA female x 2 (impedance 50Ω)
●This is a T-type branching relay adapter with SMA male and two SMA female connectors. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector relay adapter N-type female - N-type female (impedance 50Ω)
● It is a relay adapter with N-type female connectors on both sides. ● This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector relay adapter N-type male to N-type male (impedance 50Ω)
● It is a relay adapter with N-type male connectors on both sides. ● This product is adjusted to an impedance of 50Ω. For more details, please see the related links.
Coaxial connector relay adapter N-type female - N-type female (L-angle shape, impedance 50Ω)
● It is a relay adapter with an L-angle shape featuring N-type female connectors on both sides. ● This product is adjusted to an impedance of 50Ω. For more details, please refer to the related link.
Coaxial connector relay adapter N-type female - N-type male (L-angle shape, impedance 50Ω)
●This is an L-angle shaped relay adapter for N-type female and N-type male connectors. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related link.
Coaxial connector relay adapter N-type male to N-type female × 2 T-type branch (impedance 50Ω)
●This is a T-type branching relay adapter with N-type male and two N-type female connectors. ●This product is adjusted to an impedance of 50Ω. For more details, please see the related links.
Coaxial connector relay adapter, both sides F-type female (panel mount type, impedance 75Ω)
● It is a relay adapter with F-type female connectors on both sides. ● It is a type that can be mounted on a panel. ● The screw size of the F connector is 3/8 inch - 32 UNEF. ● This product is adjusted to an impedance of 75Ω. For more details, please refer to the related links.
Coaxial connector relay adapter, both sides F-type female (panel mount type: M3 screw mount type, impedance 75Ω)
● It is a relay adapter with F-type female connectors on both sides. ● It is a type that can be mounted on a panel with four M3 screws. ● The screw size of the F connector is 3/8 inch - 32 UNEF. ● This product is adjusted to an impedance of 75Ω. For more details, please see the related links.
Snap-in connector, 10Gbps, PoE++, RJ-45 tool-free straight-through wiring for LAN, compatible with CAT6A, metal shield.
● This is a snap-in type metal shielded relay adapter for extending LAN cables up to Category 6A. ● It allows wiring of cables without the need for crimping tools. ● This relay adapter supports communication for Category 6A (transmission frequency bandwidth 500MHz/10GBASE-T) compatible with 10G BASE (10Gbps). ● It is compatible with IEEE802.3bt (PoE++), a standard that enhances the power supply capability of the network, making it suitable for high-power devices such as specialized equipment and video conferencing. ● It can be installed on outlet plates from other manufacturers using a guide chip. For more details, please refer to the related links.
